Heavy plate for pressure vessel and boiler engineering
Whether for out-of-the-ordinary sizes or complex designs, ultra-high toughness, temperature and corrosion resistance, or maximum weight-savings – Dillinger is your high-power partner whenever and wherever you set special demands for your pressure vessels or boilers.
Dillinger's strengths in pressure vessel and boiler engineering:
- Our non-alloy, low-alloyed and special steels for pressure vessels and boilers conform to the relevant international standards and codes of practice.
- Products for these applications are approved in accordance with the applicable standards and codes of practice.
- Dillinger is a qualified producer with global references, a fact acknowledged by all important decision-makers in the oil, gas and energy sectors.
- We can meet practically all conceivable additional specification requirements.
- Dillinger plates can be supplied in bigger-than-average formats and dimensions, enabling you to fabricate even the largest pressure vessels cost-efficiently.
- Save time and eliminate difficult initial working and processing operations. Dillinger can supply you with edge-machined plates or plates cut to net size and/or bent to service radius, or semi-finished shell sections.
- No matter how large or complicated your order may be, and no matter where in the world your pressure vessel or boiler is to be erected – Dillinger will also be happy to make all the logistical arrangements for you.
Dillinger heavy plate for the first solar power tower plant in South Africa
Solar energy trapped in steel from Dillinger read more...
Dillinger plates for environment-friendly energy
For the solar power station Andasol 1 in Granada (Spain) with an annual capacity of 176 gigawatt hours, Dillinger has supplied 4 heads and 20 shells made of 320t SA302B in thickness up to 90 mm and width up to 4.240 mm. read more...
Plates from Dillinger for the Karan Gas Field Development Project
In order to to meet Saudi Arabia‘s growing demand for gas, state-owned Saudi Aramco developed the das Karan Gasfeld in Khursaniyah. read more...
Dillinger plates for Morokko
Four butane storage spheres for Morocco were built in 2010 and 2011 with Dillinger plates. read more...
Heavy plates for Gemany’s biggest galvanizing pot
A dip tank for giants read more...
Heavy plate for an innovative spherical gas tank
Only DICREST passed the test. read more...
DILLINAL – The lightweight solution to boost haulage capacity
06. May 2022DILLINAL was further developed as a special solution for transportable tanks. Using this weldable, fine-grained structural steel, notable for an even more remarkable combination of mechanical strength and toughness, we exhaustively exploit all potentials for minimising the tare, boosting transportation payloads and thus improves the CO2 balance for the product transported. In addition, we significantly improve the welding processing for the fabrication shop. read more...
E-Service customer platform featuring many new potentials
10. February 2022Today, Dillinger is expanding its digital service facilities in its online E Service customer portal with "myE Service". Even this first expansion stage provides a number of very useful improvements, further spectacular innovations will follow. We will not disclose any more about the latter here, let’s focus firstly on the current changes. read more...
Dillinger at Made in Steel 2021
24. September 2021Visit Dillinger at “Made in Steel“ 2021, southern Europe’s premier tradeshow for the steel industry. read more...
Prestigious conference „Pressure Vessels & Piping®“ with DILLINGER participation
07. September 2020DILLINGER presented the latest findings from its development of alloyed, creep-resistant CrMo steels to an international specialist audience: read more...
Special sour gas steel from now on in our warehouse in Dubai
12. November 2019Since the middle of the year, the range of special steels has been enriched with another specialty. read more...
Downloads
To obtain any of the publications please contact joerg.maffert@dillinger.biz !
Technical literature - general
- Tailor-made heavy plates for pressure vessels, F. Gottwalles, I. Detemple, J. Maffert, 2020
- Petrobras plants conception and their material requirements, B. Eckstein, 2009
- Future design methods for optimised use of modern high strength steels, S. Münstermann, W. Bleck, P. Langenberg, D. Schäfer, M. Feldmann, 2009
- Stahldesign - Möglichkeiten zur gezielten Beeinflussung der Eigenschaften von Stählen, I. Detemple, 2005
- ECOPRESS - Economical and safe application of modern high strength steels for pressure vessels, P. Langenberg, 2003
- Tailormade steel design for optimized results concerning the customer´s requirements, I. Detemple, C. Dilg, 2003
- The structural integrity of insert parts of high pressure hydrotreating reactor, S. Weber, 2003
- Admissible post weld heat treatment conditions for pressure equipment made of dissimilar steel grades, I. Detemple, 2003
- Alloying Concepts, I. Detemple, 2003
- Kleine Ursache große Wirkung - Mögliche Beeinträchtigung der Schweißeignung durch Mikrolegierungs- und Begleitelemente in Bau- und Druckbehälterstählen, F. Hanus, J. Schütz, 2002
- Small cause, large effect - The influence of trace elements on the properties and weldability of structural and pressure vessel steel, F. Hanus, 2002
- Grobblechherstellung aus verfahrenstechnischer Sicht, A. Streisselberger, V. Schwinn, 2002
- A process-engineering view of the production of heavy plate, A. Streisselberger, V. Schwinn, 2002
- A weld apart, K. Richter, I. Detemple, A. Kolling, 2001
- Wärmebehandlung von Schweissmischverbindungen, K. Richter, 2000
- Verlängerung der Lebensdauer von Druckgeräten durch erhöhte erstmalige Druckprüfung, H. Wiedemann, 2000
- Dureté des zones affectées - Influence de la composition chimique, des paramètres de soudage, de détensionnement thermique, F. Hanus, J. Schütz, 1998
- Heat treatment for hot forming, K. Richter, I. Detemple, A. Demmerath, 1998
- The effects of heat treatment, I. Detemple, A. Demmerath, 1998
Technical literature - CrMo/CrMoV steels for petrochemical installations
- Utilisation limits of 1¼Cr½Mo (SA-387-11-2) steel in high plate thickness, I. Detemple, B. Philippi, J. Maffert, 2020, proceeding of the ASME 2020 Pressure Vessels & Piping Conference,
2020-PVP2020-21461 - Working with specialised steels, H.-W. Bonn, I. Detemple, J. Maffert, 2015
- Testing steel at high temperatures, I. Detemple, J. Maffert, 2013
- Low alloy CrMo(V) steel plates for petrochemical reactors, I. Detemple, M. Steffen et al., 2010
- Latest trends in fabrication of high thickness reactors, P. Chattopadhyay, F. Chokshi, R. Lomash, Y.S. Trivedi, 2009
- Challenges for the application of CrMoV alloys in heavy wall high-temperature high-pressure hydro-processing equipment, M. Prager, 2009
- The use of V modified CrMo steel plates in PV fabrication, L. Antalffy, R. Whipple, 2009
- Fabrication of heavy wall reactors in CrMo(V) plates, G. Fossataro, 2009
- The new steel challenge, I. Detemple, M. Steffen, 2007
- Fluor - Working specifications for pressure vessels, R. Stepanovic, 2005
- Fabrication of heavy wall reactors, P. Chattopadhyay, B. K. Rai & Y. S. Trivedi, 2003
- Prediction of pressure vessel integrity in creep hydrogen service (Predich), I. Detemple, 2003
- Advanced steels for hydrogen reactors, I. Detemple, F. Hanus, G. Luxenburger, 1999
Technical literature - sour gas resistant pressure vessel plates
- Hydrogen induced cracking (HIC)-restistant steel - production of thick wall plates, P. Kaspari, C. Behr, 2012
- Total requirements for equipment in severe H2S service, M. Richez, F. Zanoncelli, 2009
Technical literature - steels for higher temperature service
- Diwa 353 - Alloyed steel plates for economic constructions of shell boilers, R. Cawelius et al., 2004
- DIWA 373 - The favorized steel for boilers & pressure vessels, H. Ney, R. Cawelius, F. Hanus, K. Richter, 2003
- DIWA 373 - Herstellung, Werkstoff- und Verarbeitungseigenschaften dieses warmfesten schweißgeeigneten Feinkornbaustahles, H. Ney, R. Cawelius, F. Hanus, K. Richter, 2002
Technical literature - high strength water quenched and tempered pressure vessel steels
- DIROS 500 - Advanced quenched and tempered steel for pressure vessels, R. Cawelius, M. Bockelmann, G. Luxenburger, P. Wolf, 2004
Technical literature - TMCP steels for tank construction
- Thermomechanical tank technology, P. Flüß. J. Maffert, P. Schirra 2017
Technical literature - steels for transport tanks
- Les aciers plats pour le transport des matières dangéreuses, Y. Rigal, 2001
Innovative top-quality steel products, total orientation around our customers' needs and unceasing technological development in close cooperation with our partners form the basis of our success - as they have for more than 333 years.
© 2016 Dillinger All rights reserved.
Contact
AG der Dillinger Hüttenwerke
Werkstraße 1
66763 Dillingen/Saar
Tel.: +49 6831 47 0
Fax: +49 6831 47 2212
E-Mail: info@dillinger.biz
Imprint
Data privacy statement
T&C