EN
  • Deutsch
  • Français
  • Italiano
  • 汉语
Dillinger
  • Corporate
  • Products
  • E-Service
  • News & Information
  • Contact
  • Pure Steel+
  • more
  • Corporate
  • Products
  • E-Service
  • News & Information
  • Contact
  • Pure Steel+
  • Heavy-plate products
    • Non-alloy structural steels
    • Normalised fine-grained structural steels
    • Thermomechanically rolled fine-grained steels
    • High-strength quenched & tempered fine-grained steels
    • High-temperature steels
    • Cryogenic steels
    • Weathering-resistant steels
    • Case-hardening & quenching & tempering steels
    • Security steels
    • Tool & mould steels
    • Wear-resistant steels
    • Sour-gas-resistant steels
    • Offshore steels
    • Linepipe steels
  • Applications
    • Steel Construction
    • Hydropower Engineering
    • Pressure Vessels
    • Earthmoving Machinery & Mining
    • Mechanical Engineering
    • Offshore Oil & Gas
    • Large Diameter Pipes
    • Shipbuilding & Jackup
    • Plastics and Concrete Moulds
    • Wind Power
    • Protection
    • Steel & Service Center and Plate Processing
  • Proprietary steels
    • DILLIDUR
    • DILLIMAX
    • DI-MC
    • DIWETEN
    • DICREST
    • DIWA
    • DILLINAL
    • DIROS
    • DIMO
    • DIFENDER
    • DICUT
    • DI-RACK
    • DIGEAR
    • DI-TANK
    • DIWIND
    • Other steels
  • Plates on stock and steel services
    • Heavy plate services ex stock
    • Heavy plate services ex mill
  • By-products & Chemical laboratrory
    • By-products
    • Chemical laboratrory services
Banner
  1. Products
  2. Applications
  3. Pressure Vessels

Heavy plate for pressure vessel and boiler engineering

Whether for out-of-the-ordinary sizes or complex designs, ultra-high toughness, temperature and corrosion resistance, or maximum weight-savings – Dillinger is your high-power partner whenever and wherever you set special demands for your pressure vessels or boilers.

 

Dillinger's strengths in pressure vessel and boiler engineering:

  • Our non-alloy, low-alloyed and special steels for pressure vessels and boilers conform to the relevant international standards and codes of practice.
  • Products for these applications are approved in accordance with the applicable standards and codes of practice.
  • Dillinger is a qualified producer with global references, a fact acknowledged by all important decision-makers in the oil, gas and energy sectors.
  • We can meet practically all conceivable additional specification requirements.
  • Dillinger plates can be supplied in bigger-than-average formats and dimensions, enabling you to fabricate even the largest pressure vessels cost-efficiently.
  • Save time and eliminate difficult initial working and processing operations. Dillinger can supply you with edge-machined plates or plates cut to net size and/or bent to service radius, or semi-finished shell sections.
  • No matter how large or complicated your order may be, and no matter where in the world your pressure vessel or boiler is to be erected – Dillinger will also be happy to make all the logistical arrangements for you.

Heavy-plate products

Non-alloy structural steels

Normalised fine-grained structural steels

Thermomechanically rolled fine-grained structural steels

High-strength quenched and tempered fine-grained structural steels

High-temperature steels

Cryogenic steels

Sour-gas-resistant steels

Proprietary steels

DILLINAL

DICREST

DI-TANK

DIROS

DIWA

P420M HT

CrMo- & Vanadium-modified CrMo-steels

References

Dillinger heavy plate for the first solar power tower plant in South Africa

Solar energy trapped in steel from Dillinger read more...

Dillinger plates for environment-friendly energy

For the solar power station Andasol 1 in Granada (Spain) with an annual capacity of 176 gigawatt hours, Dillinger has supplied 4 heads and 20 shells made of 320t SA302B in thickness up to 90 mm and width up to 4.240 mm. read more...

Plates from Dillinger for the Karan Gas Field Development Project

In order to to meet Saudi Arabia‘s growing demand for gas, state-owned Saudi Aramco developed the das Karan Gasfeld in Khursaniyah. read more...

Dillinger plates for Morokko

Four butane storage spheres for Morocco were built in 2010 and 2011 with Dillinger plates. read more...

Heavy plates for Gemany’s biggest galvanizing pot

A dip tank for giants read more...

Heavy plate for an innovative spherical gas tank

Only DICREST passed the test. read more...

Further references (archive)

News

News
Trade fairs/Events: Dillinger at the IPF Offshore Wind in Baltimore
20. March 2023

Meet our expert at the International Offshore Wind Partnering Forum (IPF) in Baltimore read more...

News
Trade fairs/Events: Dillinger at CONEXPO-CON/AGG in Las Vegas
06. January 2023

Meet Dillinger experts at CONEXPO-CON/AGG in Las Vegas read more...

News
New organization strengthens synergies in sales
20. October 2022

Since September, Dillinger has been relying on a changed sales organization. With a focus on reducing complexity, the structure has been streamlined so that internal processes can be accelerated. At the same time, focusing on customer needs and market developments remains a top priority. read more...

News
Finally back in presence: bauma and EuroBLECH
10. October 2022

Visit us at bauma and EuroBLECH and get in touch with us. read more...

News
DILLINAL – The lightweight solution to boost haulage capacity
06. May 2022

DILLINAL was further developed as a special solution for transportable tanks. Using this weldable, fine-grained structural steel, notable for an even more remarkable combination of mechanical strength and toughness, we exhaustively exploit all potentials for minimising the tare, boosting transportation payloads and thus improves the CO2 balance for the product transported. In addition, we significantly improve the welding processing for the fabrication shop. read more...

    Downloads

    Customer information

    Data sheets & specifications

    Technical literature

    To obtain any of the publications please contact joerg.maffert@dillinger.biz !

     

    Technical literature - general
    • Tailor-made heavy plates for pressure vessels, F. Gottwalles, I. Detemple, J. Maffert, 2020
    • Petrobras plants conception and their material requirements, B. Eckstein, 2009
    • Future design methods for optimised use of modern high strength steels, S. Münstermann, W. Bleck, P. Langenberg, D. Schäfer, M. Feldmann, 2009
    • Stahldesign - Möglichkeiten zur gezielten Beeinflussung der Eigenschaften von Stählen, I. Detemple, 2005
    • ECOPRESS - Economical and safe application of modern high strength steels for pressure vessels, P. Langenberg, 2003
    • Tailormade steel design for optimized results concerning the customer´s requirements, I. Detemple, C. Dilg, 2003
    • The structural integrity of insert parts of high pressure hydrotreating reactor, S. Weber, 2003
    • Admissible post weld heat treatment conditions for pressure equipment made of dissimilar steel grades, I. Detemple, 2003
    • Alloying Concepts, I. Detemple, 2003
    • Kleine Ursache große Wirkung - Mögliche Beeinträchtigung der Schweißeignung durch Mikrolegierungs- und Begleitelemente in Bau- und Druckbehälterstählen, F. Hanus, J. Schütz, 2002
    • Small cause, large effect - The influence of trace elements on the properties and weldability of structural and pressure vessel steel, F. Hanus, 2002
    • Grobblechherstellung aus verfahrenstechnischer Sicht, A. Streisselberger, V. Schwinn, 2002
    • A process-engineering view of the production of heavy plate, A. Streisselberger, V. Schwinn, 2002
    • A weld apart, K. Richter, I. Detemple, A. Kolling, 2001
    • Wärmebehandlung von Schweissmischverbindungen, K. Richter, 2000
    • Verlängerung der Lebensdauer von Druckgeräten durch erhöhte erstmalige Druckprüfung, H. Wiedemann, 2000
    • Dureté des zones affectées - Influence de la composition chimique, des paramètres de soudage, de détensionnement thermique, F. Hanus, J. Schütz, 1998
    • Heat treatment for hot forming, K. Richter, I. Detemple, A. Demmerath, 1998
    • The effects of heat treatment, I. Detemple, A. Demmerath, 1998

     

    Technical literature - CrMo/CrMoV steels for petrochemical installations
    • Utilisation limits of 1¼Cr½Mo (SA-387-11-2) steel in high plate thickness, I. Detemple, B. Philippi, J. Maffert, 2020, proceeding of the ASME 2020 Pressure Vessels & Piping Conference,
      2020-PVP2020-21461
    • Working with specialised steels, H.-W. Bonn, I. Detemple, J. Maffert, 2015
    • Testing steel at high temperatures, I. Detemple, J. Maffert, 2013
    • Low alloy CrMo(V) steel plates for petrochemical reactors, I. Detemple, M. Steffen et al., 2010
    • Latest trends in fabrication of high thickness reactors, P. Chattopadhyay, F. Chokshi, R. Lomash, Y.S. Trivedi, 2009
    • Challenges for the application of CrMoV alloys in heavy wall high-temperature high-pressure hydro-processing equipment, M. Prager, 2009
    • The use of V modified CrMo steel plates in PV fabrication, L. Antalffy, R. Whipple, 2009
    • Fabrication of heavy wall reactors in CrMo(V) plates, G. Fossataro, 2009
    • The new steel challenge, I. Detemple, M. Steffen, 2007
    • Fluor - Working specifications for pressure vessels, R. Stepanovic, 2005
    • Fabrication of heavy wall reactors, P. Chattopadhyay, B. K. Rai & Y. S. Trivedi, 2003
    • Prediction of pressure vessel integrity in creep hydrogen service (Predich), I. Detemple, 2003
    • Advanced steels for hydrogen reactors, I. Detemple, F. Hanus, G. Luxenburger, 1999
    Technical literature - sour gas resistant pressure vessel plates
    • Hydrogen induced cracking (HIC)-restistant steel - production of thick wall plates, P. Kaspari, C. Behr, 2012
    • Total requirements for equipment in severe H2S service, M. Richez, F. Zanoncelli, 2009
    Technical literature - steels for higher temperature service
    • Diwa 353 - Alloyed steel plates for economic constructions of shell boilers, R. Cawelius et al., 2004
    • DIWA 373 - The favorized steel for boilers & pressure vessels, H. Ney, R. Cawelius, F. Hanus, K. Richter, 2003
    • DIWA 373 - Herstellung, Werkstoff- und Verarbeitungseigenschaften dieses warmfesten schweißgeeigneten Feinkornbaustahles, H. Ney, R. Cawelius, F. Hanus, K. Richter, 2002
    Technical literature - high strength water quenched and tempered pressure vessel steels
    • DIROS 500 - Advanced quenched and tempered steel for pressure vessels, R. Cawelius, M. Bockelmann, G. Luxenburger, P. Wolf, 2004
    Technical literature - TMCP steels for tank construction
    • Thermomechanical tank technology, P. Flüß. J. Maffert, P. Schirra 2017
    Technical literature - steels for transport tanks
    • Les aciers plats pour le transport des matières dangéreuses, Y. Rigal, 2001

    Contact

     Philipp Ludwig
    Philipp Ludwig

    Head of Sales Department, Energy Transmission & Processing

    Tel.: +49 6831 472472
    Fax: +49 6831 47992685
    E-Mail

    Dillinger

    Contact

     Jörg Maffert
    Jörg Maffert

    Marketing & Technical Support

    Tel.: +49 6831 473612
    Fax: +49 6831 473089
    E-Mail

    Dillinger

    Innovative top-quality steel products, total orientation around our customers' needs and unceasing technological development in close cooperation with our partners form the basis of our success - as they have for more than 333 years.

    © 2016 Dillinger All rights reserved.

    Contact

    AG der Dillinger Hüttenwerke
    Werkstraße 1
    66763 Dillingen/Saar

    Tel.: +49 6831 47 0
    Fax: +49 6831 47 2212
    E-Mail: info@dillinger.biz

    Imprint Data privacy statement T&C

    news@dillinger

    Our newsletter news@dillinger informs you about interesting news and developments at Dillinger – the company, it’s products, examples of steel applications, processing instructions, etc.

    Newsletter subscription

    Heavy-plate products
    • Non-alloy structural steels
    • Normalised fine-grained structural steels
    • Thermomechanically rolled fine-grained steels
    • High-strength quenched & tempered fine-grained steels
    • High-temperature steels
    • Cryogenic steels
    • Weathering-resistant steels
    • Case-hardening & quenching & tempering steels
    • Security steels
    • Tool & mould steels
    • Wear-resistant steels
    • Sour-gas-resistant steels
    • Offshore steels
    • Linepipe steels
    Applications
    • Steel Construction
    • Hydropower Engineering
    • Pressure Vessels
    • Earthmoving Machinery & Mining
    • Mechanical Engineering
    • Offshore Oil & Gas
    • Large Diameter Pipes
    • Shipbuilding & Jackup
    • Plastics and Concrete Moulds
    • Wind Power
    • Protection
    • Steel & Service Center and Plate Processing
    Proprietary steels
    • DILLIDUR
    • DILLIMAX
    • DI-MC
    • DIWETEN
    • DICREST
    • DIWA
    • DILLINAL
    • DIROS
    • DIMO
    • DIFENDER
    • DICUT
    • DI-RACK
    • DIGEAR
    • DI-TANK
    • DIWIND
    • Other steels
    Plates on stock and steel services
    • Heavy plate services ex stock
    • Heavy plate services ex mill
    By-products & Chemical laboratrory
    • By-products
    • Chemical laboratrory services